|
Catalogue No. & Description:
|
Product Dimensions:
|
Available Colours:
|
Usage:
|
Standard Purchase Units:
|
Package Dimensions:
|
Package Weight:
|

|
EP30, EPR High Voltage Insulation Tape
|
1" wide x 0.030" thick x 25' length
|
Grey
|
Used to insulate and reinforce insulation already in place
|
Individual roll
|
5" x 5" x 1"
12cm x 12cm x 3cm
|
0.4 lb
194 g
|
Case of 44 rolls
|
12" x 12" x 12"
31cm x 31cm x 30cm
|
20 lb
9 kg
|

|
FG180, Fibreglass Tape
|
3/4" wide x 100' length
|
Beige
|
Heat resistant tape for permanent hold inside of cable repair
|
Individual roll
|
5" x 5" x 1"
12cm x 12cm x 3cm
|
0.4 lb
195 g
|
Case of 44 rolls
|
12" x 12" x 12"
31cm x 31cm x 30cm
|
20 lbs
9.5 kg
|

|
H60/**, Hypalon Jacket Repair Tape
|
2" wide x 0.060" thick x 25' length |
Black
Yellow
Orange
Green
|
Used to replace jacket material in multi-conductor flexible cable. Available in black, yellow, orange, and green
|
Individual Roll
|
5" x 5" x 2"
12cm x 12cm x 5cm
|
1.5 lb
713 g
|
Case or 20 rolls
|
12" x 12" x 12"
31cm x 31cm x 30cm
|
40 lb
18 kg
|

|
N60, Neoprene Jacket Repair Tape
|
2" wide x 0.060" thick x 25' length
|
Black only
|
Used to replace jacket material in multi-conductor flexible cable. Recommended for colder temperatures. Black only
|
Individual Roll
|
5" x 5" x 2"
12cm x 12cm x 5cm
|
1.5 lb
713 g
|
Case of 20 rolls
|
12" x 12" x 12"
31cm x 31cm x 30cm
|
40 lb
18 kg
|

|
RS20, Red Separator Tape
|
1-1/2" wide x 20' length
|
Red
|
Used to separate the cable jacket from the interior of the cable
|
Individual Roll
|
1.75" x 1.5" dia.
4.5cm x 4cm dia.
|
less than 1/2 lb
35 g
|
Package of 10 rolls
|
1.75" x 5.5" x 6"
4.5cm x 14cm x 15cm
|
1 lb
335 g
|

|
R30, Rubber Reinforcing Tape
|
1" wide x 0.030" thick x 25' length
|
Black |
Used as an integral part of cable jacket to provide reinforcement
|
Individual Roll
|
5" x 5" x 1"
12cm x 12cm x 3 cm
|
0.7 lb
305 g
|
Case of 44 rolls
|
12" x 12" x 12"
31cm x 31cm x 30cm
|
30 lb
13.5 kg
|
 |
SC20, Nylon Semi-conductive tape
|
1/2" wide x 20' length
|
Black |
Used as a conductor and or insulation shield where the profile is linear (Silver soldered connection)
|
Individual Roll
|
1/2" x 1" dia.
2cm x 3cm dia.
|
less than 1/2 lb
10 g
|
Package of 10 rolls
|
1/2" x 3" x 6"
2cm x 7.5cm x 15cm
|
less than 1/2 lb
92 g
|

|
SCR40, Rubber Semi-conductive tape
|
1" wide x 0.030" thick x 40' length |
Black |
Used as a conductor and or insulation shield where the profile is non-linear (Compression connection)
|
Individual Roll
|
5" x 5" x 1"
12cm x 12cm x3cm
|
1/2 lb
220 g
|
Case of 44 rolls
|
12" x 12" x 12"
31cm x 31cm x 31cm
|
21 lb
9.5 kg
|
 |
TC25, Tinned Copper Braid
|
1" wide x 25' length
|
n/a |
Used as an overall phase ground shield for insulated conductors. Applied over semi-conductive layer.
|
Box of 2 rolls
|
5" x 5" x 1"
12cm x 12cm x 3cm
|
0.4 lb
180 g
|

|
TC100, Tinned Copper Braid
|
1" wide x 100' length
|
n/a |
Used as an overall phase ground shield for insulated conductors. Applied over semi-conductive layer
|
Individual Roll
|
5" x 5" x 1"
12cm x 12cm x 3cm
|
0.7 lb
310 g
|
Case of 44 rolls
|
12" x 12" x 12"
31cm x 31cm x 31cm
|
30 lb
13.5 kg
|
 |
BC001, Bonding Cement
|
1/2 pint can, 8 oz.
|
n/a |
Used to promote bonding between the original cable jacket and the newly applied Neoprene/Hypalon jacket tape
|
Individual item only
|
3" tall x 3" dia.
7.5cm x 7.5cm dia.
|
0.6 lb
310 g
|

|
MR001, Mold Release
|
9.5 oz Spray Can
|
n/a |
Apply to vulcanizing molds to assist in cable release after vulcanizing cycle.
|
Individual item only
|
8" tall x 3" dia.
20cm high x 7.5cm dia.
|
1 lb
390 g
|

|
CEC-01, Citrex Electrical Cleaner
|
1 litre Spray Bottle w/trigger (34 oz)
|
n/a
|
Used to clean conductor insulation and remove any residual semi-conductive material. Sold by litre volume.
|
Individual item only
|
9" tall x 3" dia. 12" tall w/trigger
23cm x 8cm dia 30cm tall w/trigger
|
1.3 lb
600 g
|
 |
MCS-PWHP-1, HP Solvent Single Pack |
1 Citrus based solvent wipe |
n/a |
Used to clean conductor insulation and remove any residual semi-conductive material. |
Individual item only |
4 ½” length x 3” width
11cm length x 8cm width |
0.04 lb
18 g |
 |
MCS-PWHP-2, HP Solvent Tandem Pack |
1 Citrus based solvent wipe and 1 drying cloth |
n/a |
Used to clean and dry conductor insulation and remove any residual semi-conductive material. |
Individual item only |
3 ½” length x 5” width
9cm length x 13cm width |
0.02 lb
10 g |
 |
EFSS-01*, Silver Solder
|
Sold in 0.5 kg units
|
n/a |
Used for soldering of electrical conductors during cable repairs
|
0.5 kg units
|
12" dia. x 1/2" thick bundle
30" dia. x 1cm thick bundle
|
1 lb
0.5 kg
|
|
EFSP-01*, Silver Solder Paste
|
7oz plastic bottle
|
n/a |
Used with silver solder above
|
7oz
210 ml
|
4" tall x 2" dia.
10cm tall x 5cm dia.
|
1/2 lb
223 g
|
 |
PER30-88, Perlon Tape
|
30mm wide x 88 feet long |
White with black stripe |
Sacrificial Tape for Cable Vulcanizing Oven. Inner most layer of sacrificial tapes. |
Individual Roll |
5” x 5” x 1”
12cm x 12cm x 3cm |
0.41 lb
185 g |
 |
PER50-88, Perlon Tape
|
50mm wide x 88 feet long |
White with black stripe |
Sacfricial Tape for Cable Vulcanizing Oven. Inner most layer of sacrificial tape. |
Individual Roll |
5” x 5” x 2”
12cm x 12cm x 5cm |
0.61 lb
276 g |
 |
CPF-100, Cuprophane Foil
|
30mm wide, Sold by weight |
n/a – clear film |
Sacrificial Tape for Cable Vulcanizing Oven. Alternating layer of sacrificial tape. |
Individual Roll |
5” x 5” x 1”
12cm x 12cm x 3cm |
0.68 lb
310 g |